NEW! Retiga-EXL | |
|
 |
| The Retiga-EXL utilizes a cooled interline CCD and the remarkable speed of Lightwire™ 800 (an optimized version of the IEEE-1394b protocol). This low-noise camera's 1.4-million-pixel spatial resolution and 14-bit digitization are ideally suited for applications such as live-cell microscopy. |
 |
|
 |
| Features |
 |
1392 x 1040 pixels |
 |
6.45µm x 6.45µm pixel size |
 |
High sensitivity (especially in the near IR) |
 |
Front-illuminated interline CCD |
 |
Binning up to 8x8 |
 |
800Mb/s bandwidth capacity |
 |
15fps full resolution @ 14 bits |
|
|
 |
| Applications |
 |
High-speed, low-light, live-cell fluorescent protein imaging |
 |
Real-time spinning-disk confocal microscopy |
 |
Cell-trafficking studies |
 |
Cell-motility studies |
 |
Real-time DIC |
 |
Biofilm imaging |
 |
Particle tracking |
 |
Semiconductor inspection |
 |
Solar panel inspection |
|
|
 |
 |
 |
 |
| Models |
 |
Retiga-EXL Mono Lightwire 800 Cooled Model: RET-EXL-L-M-14-C |
|
|
|
|
|
 |
^ top |
 |
NEW! Rolera-MGi Plus | |
|
 |
| The Rolera-MGi Plus utilizes a back-illuminated, 512x512-pixel EMCCD from e2v Technologies in order to deliver high-sensitivity imaging for spinning-disk confocal microscopy applications. |
 |
|
 |
| Features |
 |
512 x 512 pixels |
 |
16µm x 16µm pixel size |
 |
Extremely high sensitivity for demanding low-light & fluorescence imaging |
 |
Back illuminated EMCCD Chip |
 |
Binning up to 6x6 |
 |
Traditional Mode and EMCCD Mode |
 |
EM gain stability delivers improved quantitative capabilities |
 |
FPGA-based technology supports potential future upgrade paths |
 |
Built-in 'anti-aging technology' greatly extends lifetime of camera's EMCCD |
 |
PVCAM provides instant compatibility with many advanced imaging software packages |
|
|
 |
| Applications |
 |
High-speed, low-light imaging |
 |
Spinning disk confocal microscopy |
 |
Dynamic ratio imaging (e.g., pH and low-concentration flux) |
 |
Live-Cell fluorescent protein imaging |
|
|
 |
 |
 |
 |
| Models |
 |
Rolera-MGi Plus Monochrome Model: ROL-MGi-PLUS-F-M-14-C |
|
|
|
|
|
 |
^ top |
 |
Retiga 4000RV | |
|
 |
| For High Dynamic low light fluorescence and Polarization applications. |
 |
|
 |
| Features |
 |
iGlo™ Technology |
 |
Black-Out Mode turns all lights off for low-light imaging applications |
 |
Three-stage Peltier cooling |
 |
cooling to -30C (changeable in 1 degree increments) |
 |
Kodak Sensor KAI-4021 |
 |
2048 X 2048 pixels |
 |
7.4µm x 7.4µm pixel size |
 |
Linear full well 80,000e- |
 |
QE 55% at 500nm |
 |
Binning up to 8x8 |
 |
ROI continuously variable in single-pixel increments |
 |
External trigger |
|
|
 |
| Applications |
 |
Quantitative Fluorescence Imaging |
 |
Live-Cell Imaging |
 |
Semiconductor Inspection |
 |
Chemiluminescence |
 |
Particle Tracking |
 |
LCD Inspection |
|
|
 |
 |
 |
 |
| Models |
 |
Retiga 4000RV Fast 1394 Mono Cooled Model: RET-4000RV-F-M-12-C |
|
|
|
|
|
 |
^ top |
 |
Retiga 2000RV | |
|
 |
| For High Dynamic low light fluorescence and Polarization applications. |
 |
|
 |
| Features |
 |
iGlo™ Technology |
 |
Black-Out Mode turns all lights off for low-light imaging applications |
 |
Three-stage Peltier cooling |
 |
cooling to -30C (changeable in 1 degree increments) |
 |
Kodak Sensor KAI-2020 |
 |
1600 X 1200 pixels |
 |
7.4µm x 7.4µm pixel size |
 |
Linear full well 80,000e- |
 |
QE 55% at 500nm |
 |
Binning up to 8x8 |
 |
ROI continuously variable in single-pixel increments |
 |
External trigger |
|
|
 |
| Applications |
 |
Quantitative Fluorescence Imaging |
 |
Live-Cell Imaging |
 |
Forensic Analysis |
 |
Metrology |
 |
Particle Tracking |
 |
LCD Inspection |
|
|
 |
 |
 |
 |
| Models |
 |
Retiga 2000RV Fast 1394 Mono Cooled Model: RET-2000RV-F-M-12-C |
|
|
|
|
|
 |
^ top |
 |
Retiga-SRV | |
|
 |
| For low-light, high-speed, and high-sensitivity in life science applications. |
 |
|
 |
| Features |
 |
1392 x 1040 pixels |
 |
6.45µm x 6.45µm |
 |
2/3" optical format |
 |
Sensor readout noise 8e- |
 |
Dark current 0.05e-/pix/s cooled |
 |
Electronic shutter |
 |
Binning up to 8x8 |
 |
ROI |
 |
Cooling -30°, regulated |
 |
External trigger |
|
|
 |
| Applications |
 |
Quantitative Fluorescence Microscopy |
 |
FRET |
 |
Live-Cell Fluorescent Protein Imaging |
 |
Ratiometric Analysis (Ca+2, pH, etc. |
 |
Whole Animal Fluorescence |
 |
FRAP |
 |
FISH |
|
|
 |
 |
 |
 |
| Models |
 |
Monochrome Retiga-SRV Model: RET-SRV-F-M-12-C |
|
|
|
|
|
 |
^ top |
 |
Retiga EXi | |
|
 |
| For high sensitivity quantitative analysis in ultra low light/ brightfield/darkfield/ fluorescence/NIR imaging in life science and industrial applications. |
 |
|
 |
| Features |
 |
1392 x 1040 pixels |
 |
6.45µm x 6.45µm |
 |
2/3" optical format |
 |
Sensor readout noise 8e- |
 |
Dark current 0.15e-/pix/s cooled |
 |
Electronic shutter |
 |
Binning up to 8x8 |
 |
ROI |
 |
Cooling 25°C below ambient |
 |
External trigger |
|
|
 |
| Applications |
 |
Brightfield/Dark Field Microscopy |
 |
Fluorescence Microscopy |
 |
Pathology, Histology, Cytology |
 |
GFP, FISH |
 |
DNA Analysis |
 |
NIR Imaging |
 |
Motility and Motion Analysis |
 |
Semiconductor Inspection |
 |
Failure Analysis |
 |
Forensic Analysis |
|
|
 |
 |
 |
 |
| Models |
 |
Retiga EXi Fast 1394 Mono Cooled Model: RET-EXi-F-M-12-C-IR Model:
RET-EXi-F-M-12-C |
 |
Retiga EXi Fast 1394 Color Cooled Model: RET-EXi-F-CLR-12-C |
 |
Retiga EXi Fast 1394 Mono Model: RET-EXi-F-M-12-IR Model:
RET-EXi-F-M-12 |
 |
Retiga EXi Fast 1394 Color Model: RET-EXi-F-CLR-12 |
|
|
|
|
|
 |
^ top |
 |
Retiga 4000R | |
|
 |
| For high precision quantitative analysis in low light/brightfield/darkfield/ fluorescence imaging in life science and industrial applications. |
 |
|
 |
| Features |
 |
Kodak Sensor KAI-4021 |
 |
2048 x 2048 pixels |
 |
7.4µm x 7.4µm pixel size |
 |
Linear full well 40,000e- |
 |
QE 55% at 500nm |
 |
Electronic shutter |
 |
Binning up to 8x8 |
 |
ROI |
 |
Cooling 25°C below ambient |
 |
External trigger |
|
|
 |
| Applications |
 |
Brightfield, Phase-Contrast & Dark Field Microscopy |
 |
Fluorescence Imaging |
 |
Pathology, Histology, Cytology |
 |
DNA Analysis |
 |
Metallurgical Microscopy |
 |
LCD Inspection |
 |
Manufacturing Quality Control |
 |
Failure Analysis |
 |
Forensic Analysis |
 |
Automated Imaging |
|
|
 |
 |
 |
 |
| Models |
 |
Retiga 4000R Fast 1394 Mono Cooled Model: RET-4000R-F-M-12-C |
 |
Retiga 4000R Fast 1394 Mono Model: RET-4000R-F-M-12 |
 |
Retiga 4000R Fast 1394 Color Cooled Model: RET-4000R-F-CLR-12-C |
 |
Retiga 4000R Fast 1394 Color Model: RET-4000R-F-CLR-12 |
|
|
|
|
|
 |
^ top |
 |
Retiga 2000R | |
|
 |
| For high precision quantitative analysis in low light/brightfield/darkfield/ fluorescence imaging in life science and industrial applications. |
 |
|
 |
| Features |
 |
Kodak Sensor KAI-2020 |
 |
1600 x 1200 pixels |
 |
7.4µm x 7.4µm pixel size |
 |
Linear full well 40,000e- |
 |
QE 55% at 500nm |
 |
Electronic shutter |
 |
Binning up to 8x8 |
 |
ROI |
 |
Cooling 25°C below ambient |
 |
External trigger |
|
|
 |
| Applications |
 |
Brightfield/Dark Field Microscopy |
 |
Fluorescence Microscopy |
 |
Pathology, Histology, Cytology |
 |
GFP, FISH |
 |
DNA Analysis |
 |
NIR Imaging |
 |
Motility and Motion Analysis |
 |
Semiconductor Inspection |
 |
Failure Analysis |
 |
Forensic Analysis |
|
|
 |
 |
 |
 |
| Models |
 |
Retiga 2000R Fast 1394 Mono Cooled Model: RET-2000R-F-M-12-C |
 |
Retiga 2000R Fast 1394 Mono Model: RET-2000R-F-M-12 |
 |
Retiga 2000R Fast 1394 Color Cooled Model: RET-2000R-F-CLR-12-C |
 |
ON SALE Retiga 2000R Fast 1394 Color Model: RET-2000R-F-CLR-12 |
|
|
|
|
|
 |
^ top |
 |
Rolera-XR | |
|
 |
| For quantitative analysis in IR and brightfield imaging in life science, industrial and forensic applications. |
 |
|
 |
| Features |
 |
696 x 520 pixels |
 |
13.7µm x 13.7µm pixel size |
 |
2/3" optical format |
 |
Electronic shutter |
 |
Binning up to 8x8 |
 |
ROI |
 |
External trigger |
|
|
 |
| Applications |
 |
Real-time Low Light Infra-Red Imaging |
 |
IR-DIC |
 |
Surveillance |
 |
Low Light Level Fluorescence |
 |
Wafer Inspection |
 |
Live Cell Imaging |
|
|
 |
 |
 |
 |
| Models |
 |
Rolera-XR Mono Fast 1394 Cooled Model: ROL-XR-F-M-12-C |
 |
Rolera-XR Mono Fast 1394 Model: ROL-XR-F-M-12 |
|
|
|
|
|
 |
^ top |
 |
QICAM 12-bit | |
|
 |
| For quantitative analysis in brightfield imaging in life science and industrial applications. |
 |
|
 |
| Features |
 |
1392 x 1040 pixels |
 |
4.65µm x 4.65µm pixel size |
 |
1/2" optical format |
 |
Electronic shutter |
 |
12-bit |
 |
Binning up to 8x8 |
 |
ROI |
 |
External trigger |
|
|
 |
| Applications |
 |
Brightfield/Dark Field Microscopy |
 |
Live Cell Imaging |
 |
Pathology, Histology, Cytology |
 |
DNA Analysis |
 |
Motility and Motion Analysis |
 |
Semiconductor Inspection |
 |
Failure Analysis |
 |
Forensic Analysis |
|
|
 |
 |
 |
 |
| Models |
 |
QICAM 12-bit Mono Fast 1394 Cooled Model: QIC-F-M-12-C |
 |
QICAM 12-bit Color Fast 1394 Cooled Model: QIC-F-CLR-12-C |
 |
QICAM 12-bit Mono Fast 1394 Model: QIC-F-M-12 |
 |
QICAM 12-bit Color Fast 1394 Model: QIC-F-CLR-12 |
|
|
|
|
|
 |
^ top |